r4/arduino-spybug
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

component switch support to save power when waiting

Browse Source
This commit is contained in:
r4 2022-04-14 20:48:27 +02:00
parent c2f41e41c7
commit bfa80a629e
1 changed files with 15 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
spybug/spybug.ino
View File

@ -40,6 +40,9 @@
//#define DEBUG_RECORDING //#define DEBUG_RECORDING
//#define SERIAL_OUTPUT //#define SERIAL_OUTPUT
//#define PIN_COMPONENT_SWITCH 2 /* Use a digital signal to switch on/off the microphone and SD card for less power draw. */
//#define COMPONENT_SWITCH_ON HIGH
#define SAMPLE_MODE_U8 #define SAMPLE_MODE_U8
//#define SAMPLE_MODE_S16 //#define SAMPLE_MODE_S16
@ -270,12 +273,24 @@ void setup() {
#ifdef SERIAL_OUTPUT #ifdef SERIAL_OUTPUT
Serial.begin(9600); /* Set baud rate. */ Serial.begin(9600); /* Set baud rate. */
setup_serial_in_out(); /* Add printf support. */ setup_serial_in_out(); /* Add printf support. */
#endif
// Component Switch Setup
#ifdef PIN_COMPONENT_SWITCH
pinMode(PIN_COMPONENT_SWITCH, OUTPUT);
#endif #endif
// Delay Triggering // Delay Triggering
#if defined(RECORDING_DELAY_IN_MINUTES) && RECORDING_DELAY_IN_MINUTES != 0 #if defined(RECORDING_DELAY_IN_MINUTES) && RECORDING_DELAY_IN_MINUTES != 0
#ifdef PIN_COMPONENT_SWITCH
digitalWrite(PIN_COMPONENT_SWITCH, !COMPONENT_SWITCH_ON);
#endif
printf(F("Waiting %u minute%s before starting to record...\n"), RECORDING_DELAY_IN_MINUTES, RECORDING_DELAY_IN_MINUTES == 1 ? "" : "s"); printf(F("Waiting %u minute%s before starting to record...\n"), RECORDING_DELAY_IN_MINUTES, RECORDING_DELAY_IN_MINUTES == 1 ? "" : "s");
Serial.flush(); Serial.flush();
low_power_sleep_minutes(RECORDING_DELAY_IN_MINUTES); /* Draws ~12.5mA instead of ~30mA when using delay(). */ low_power_sleep_minutes(RECORDING_DELAY_IN_MINUTES); /* Draws ~12.5mA instead of ~30mA when using delay(). */
#endif
// Activate Components
#ifdef PIN_COMPONENT_SWITCH
digitalWrite(PIN_COMPONENT_SWITCH, COMPONENT_SWITCH_ON);
delay(500); /* Wait for components to initialize. */
#endif #endif
// Start Watchdog (wdt_enable() doesn't fully reset) // Start Watchdog (wdt_enable() doesn't fully reset)
start_watchdog_with_full_reset(); start_watchdog_with_full_reset();